>

Piper J3 Cub
Build Details


by Michael Myers

tight_fitting_joints.jpg
Tight fitting joints
1-1_2_turns_of_masking_tape.jpg
1-1/2 turns of masking tape
strut_connectors.jpg
Strut connectors
tail_detail.jpg
Tail detail
esc_extension.jpg
ESC extension
tail_covered_with_polyspan.jpg
Tail covered with Polyspan
rudder_pull-pull.jpg
Rudder pull-pull
cowl_build.jpg
Cowl build
more_strut_detail.jpg
More strut detail
my_favorite_epoxies.jpg
My favorite epoxies
doped_and_assembled.jpg
Doped and assembled
constructing__eyebrows_.jpg
Constructing "eyebrows"
jury_strut_binding.jpg
Jury Strut binding
gluing__eyebrows_.jpg
Gluing "eyebrows"
toothpick_and_coffee_stirrers.jpg
Toothpick and coffee stirrers
add_some_balsa.jpg
Add some balsa
in_position.jpg
In position
_swing_away_.jpg
"Swing Away"
all_primed.jpg
All primed
wing__v__bracing_is_very_functional.jpg
Wing "V" bracing is very functional
after_maiden_flight.jpg
After maiden flight
manifold___decal_detail.jpg
Manifold & decal detail
hangared.jpg
Hangared
ledge_on_upper_door.jpg
Ledge on upper door
slide_catch_extended.jpg
Slide catch extended
pilot_in_cockpit.jpg
Pilot in cockpit
doors_open.jpg
Doors open
swing_away_for_battery_access.jpg
Swing away for battery access

mhmyers.com